G80 3mm en 2mm OmRopFryslan sjorring Chain Hege Tensile Alloy Steel Lifting Link Chain foar elektryske hoist
G80 3mm en 2mm OmRopFryslan sjorring Chain Hege Tensile Alloy Steel Lifting Link Chain foar elektryske hoist
Kategory
Opheffen en sjorren, hijsketting,koarte ketting ketting, rûne ketting opheffing,Grade T chain, Grade DAT chain,Grade DT ketting, DIN EN 818-7koarte ketting foar opheffen,fyn tolerânsje hijsketting,alloy stielen ketting
Oanfraach
Opheffen en sjorren, loads opheffen, loads binend
As in rûne stielen ketting ketting fabrikant foar 30 jier, ús fabryk is ferbliuw mei en tsjinne de tige wichtige perioade fan Sineeske keten meitsjen yndustry evolúsje catering foar mynbou (koalmyn yn it bysûnder), swiere lifting, en yndustriële conveying easken op hege sterkte round stielen link keatlingen. Wy stopje net by de liedende fabrikant fan rûne kettingketen yn Sina te wêzen (mei jierlikse oanbod fan mear as 10,000T), mar hâlde ús oan net-stopjende skepping en ynnovaasje.
figuer 1: hoist chain / links
Kaai
| 1 | Traverse sintrum line fan de keppeling | l | is de meardere pitch lingte |
| p | is it fjild | dm | is de materiaal diameter as mjitten |
| ds | is de weld diameter | e | is de lingte dimensionally beynfloede troch welding |
| w3 | is de ynterne breedte by de weld | w2 | is de eksterne breedte oer de weld |
Tabel 1: ôfmjittings fan 'e takelketting / link (mm)
| Nominal size dn | Material diametertolerance | Pitch | Width | Gauge length of 11 x pn | Weld diameter ds max. | |||
|
pn |
tolerance1) | internal w3 min. | external w2 max. |
l |
tolerance1) | |||
| 4 | ± 0.2 | 12 | 0.25 | 4.8 | 13.6 | 132 | 0.6 | 4.3 |
| 5 | ± 0.2 | 15 | 0.3 | 6.0 | 17.0 | 165 | 0.8 | 5.4 |
| 6 | ± 0.2 | 18 | 0.35 | 7.2 | 20.4 | 198 | 1.0 | 6.5 |
| 7 | ± 0.3 | 21 | 0.4 | 8.4 | 23.8 | 231 | 1.1 | 7.6 |
| 8 | ± 0.3 | 24 | 0.5 | 9.6 | 27.2 | 264 | 1.3 | 8.6 |
| 9 | ± 0.4 | 27 | 0.5 | 10.8 | 30.6 | 297 | 1.4 | 9.7 |
| 10 | ± 0.4 | 30 | 0.6 | 12.0 | 34.0 | 330 | 1.6 | 10.8 |
| 11 | ± 0.4 | 33 | 0.6 | 13.2 | 37.4 | 363 | 1.7 | 11.9 |
| 12 | ± 0.5 | 36 | 0.7 | 14.4 | 40.8 | 396 | 1.9 | 13.0 |
| 13 | ± 0.5 | 39 | 0.8 | 15.6 | 44.2 | 429 | 2.1 | 14.0 |
| 14 | ± 0.6 | 42 | 0.8 | 16.8 | 47.6 | 462 | 2.2 | 15.1 |
| 16 | ± 0.6 | 48 | 0.9 | 19.2 | 54.4 | 528 | 2.5 | 17.3 |
| 18 | ± 0.9 | 54 | 1.0 | 21.6 | 61.2 | 594 | 2.9 | 19.4 |
| 20 | ± 1.0 | 60 | 1.2 | 24.0 | 68.0 | 660 | 3.2 | 21.6 |
| 22 | ± 1.1 | 66 | 1.3 | 26.4 | 74.8 | 726 | 3.5 | 23.8 |
| 1) These tolerances are usually divided into + 2/3 and - 1/3 for both the individual link and thestandard gauge length. | ||||||||
Tabel 2: limyt fan wurklast foar takelketting (WLL)
| Nominal size dn mm | Chain type T t | Chain type DAT t | Chain type DT t |
| 4 5 6 | 0.5 0.8 1.1 | 0.4 0.63 0.9 | 0.25 0.4 0.56 |
| 7 8 9 | 1.5 2 2.5 | 1.2 1.6 2 | 0,75 1 1.25 |
| 10 11 12 | 3.2 3.8 4.5 | 2.5 3 3.6 | 1.6 1.9 2.2 |
| 13 14 16 | 5.3 6 8 | 4.2 5 6.3 | 2.6 3 4 |
| 18 20 22 | 10 12.5 15 | 8 10 12.5 | 5 6.3 7.5 |
| mean stress N/mm2 | 200 | 160 | 100 |
Tabel 3: hoist chain manufacturing bewiis krêften en breaking krêften
| Nominal size dn mm | Manufacturing proof force (MPF) kN myn. | Breaking force (BF) kN myn. |
| 4 | 12.6 | 20.1 |
| 5 | 19.6 | 31.4 |
| 6 | 28.3 | 45.2 |
| 7 | 38,5 | 61.6 |
| 8 | 50.3 | 80,4 |
| 9 | 63.6 | 102 |
| 10 | 78,5 | 126 |
| 11 | 95 | 152 |
| 12 | 113 | 181 |
| 13 | 133 | 212 |
| 14 | 154 | 246 |
| 16 | 201 | 322 |
| 18 | 254 | 407 |
| 20 | 314 | 503 |
| 22 | 380 | 608 |
Tabel 4: totale ultime elongation en oerflak hurdens
|
| hoist chain types | ||
| T | DAT | DT | |
| Total ultimate elongation IN%min | 10 | 10 | 5 |
| Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
